Will the Curt Channel-Mount Coupler Fit a 1-3/4" Hole Spacing

Updated 07/13/2022 | Published 07/12/2022

Products Featured in This Question

Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs

(122)

$111.75

Curt 3-Position Adjustable Channel Bracket

(11)

$35.35

Question:

I have a question about the hole spacing. I notice one answer is that they are 2inch apart. I have a trailer with a pintle hook I want to replace. They are 5/8 Bolts and the hole spacing is 13/4inch center to center and 2inch outside to outside of the next hole. Is this going to work?

asked by: Bob

Expert Reply:

The industry standard for channel couplers is 2" spacing (center to center) with 5/8" holes. If you have something different then we would not have options for this and therefore I recommend simply welding on a new channel with standard spacing such as the Curt 3-Position Adjustable Channel Bracket part # C48610 which matches up with the Curt Channel-Mount Coupler part # C25328.

expert reply by: Conner L