Timbren Suspension Enhancement that Fits 2020 Winnebago Minnie Travel Trailer 2500FL

Question

Question:

most weight is on right side. want to raise right side about 2 inches to level the trailer. has 23? inch springs so no option here. looking for airlift system that will fit a travel trailer. do not want to compromise the axle equalizing system. any help, suggestions welcome.

asked by: Robert M

1

Helpful Expert Reply:

While we don't have any air spring kits that fit your 2020 Winnebago Minnie travel trailer we do have Timbren kits like the # TTRA1032 which can be used on trailer suspension to provide addition suspension support. These do provide even support for both sides of the axle though and there isn't a way to provide more support to one side than the other.

expert reply by: Jameson C

1

Answer 1

I assume what you have is a Class C motorhome, and the SumoSprings Solo Custom Helper Springs #SSR-107-54 will help, but they won't stop the back-and-forth rocking completely, they will offer some support. Air bags like the Air Lift LoadLifter…

view full answer...

Answer 2

We've got a couple options for Air Lift kits that will a 2002 Ford E-450 chassis. Which one you need will depend on where the supply lines are ran on the frame. Both kits have a 5,000 lbs load leveling capacity. I have listed them below: Outside…

view full answer...

Answer 3

There are two possible options from Air Lift for your 2009 Tioga 31M. They are as follows: -Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57242 -Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear…

view full answer...

Answer 4

I checked with Roadmaster and for your 2005 Forest River Sunseeker built on a E-450 Class C chassis you'd want the part #RM-1139-115 for the front bar and part #RM-1139-147 for the rear bar.

view full answer...

Answer 5

We do have front and rear sway bars that fit your 2010 Jayco Grehawk that is built on a Ford E-450 Class C chassis with the part #RM-1139-147 for the rear bar and part #RM-1139-176 for the front.

view full answer...

Answer 6

The W217602458 that you're likely seeing is the manufacturer's part number, which will be different from ours - #F22ZR; but they are the same part and will carry the same warranty, etc. Additionally, the Firestone warranty is a lifetime…

view full answer...

Answer 7

I recommend installing the SumoSprings #SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren #TFERSD you found is much stiffer and…

view full answer...

Answer 8

For your Class C RV built on a 2017 Ford E-450 chassis, the Air Lift LoadLifter 5000 Air Helper Springs, #AL57242, are confirmed to fit your vehicle. These Air Lift springs have a 5,000 lbs capacity and are designed to upgrade the rear suspension of…

view full answer...

Answer 9

I checked with Roadmaster, the correct Roadmaster Front Anti-Sway Bar for a 2017 Forest River Sunseeker 3010DS is part #RM-1139-176 which replaces the OEM bar and reuses the factory end links. The Roadmaster Front Anti-Sway Bar part #RM-1139-189 is…

view full answer...

Answer 10

I have just what you need to add airbags to a 2001 Ford E-450 Chassis (Class C Motorhome), the Air Lift LoadLifter 5000 Air Helper Springs part #AL57242 unless you have supply lines on the outside of the frame then use part #AL57131. These kits are…

view full answer...

Answer 11

For your 2023 Coachman Leprechaun on a E-450 chassis, you will want the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets item #RM47MR. We also have Anti-Sway bars which will help improve your ride quality. These will replace your…

view full answer...

Answer 12

You are correct, the rear sway bar part number you need for your 2014 Fleetwood Jamboree Sport 31M Ford E450 is the part #RM-1139-163. Then for the front sway bar you'd want the part #RM-1139-189 and you'd be set. These will make a huge…

view full answer...