Mounting Holes Measurements and Strap Width for Dutton Lainson 600 and 900 Pound Winches

Question

Question:

Can you please tell me the base plate measurements on these 2 winches: DL15002 and DL14125 ? Also, just to verify, is a 2inch wide strap okay for these? Thanks

asked by: Walt T

1

Helpful Expert Reply:

Both hand winches # DL15002 and # DL14125 have the same mounting pattern. I have included a picture that shows the dimensions for you. A 2 inch wide strap will work with these winches. You will want the strap capacity to be at least 1.5 times higher than the winch capacity for safety.

For winch # DL15002 the recommended strap is # DL24291. And for winch # DL14125 the recommended strap is # DL24239.

expert reply by: Michael H

1

click to enlarge

Answer 1

Dutton Lainson trailer winches like the #DL14125 have bolt patterns that are designed to fit the standard bolt pattern the winch mount on your boat trailer would have so this will work for you. Most of the holes are slotted on the plate of this winch…

view full answer...

Answer 2

We definitely have a really good winch for your specific application with the Dutton-Lainson Hand Winch #DL14125. This compact winch features a 600 pound capacity, can be used with wire rope or polyester strap, measures just over 5 inches wide…

view full answer...

Answer 3

The strap that you will need to use for the Dutton-Lainson Hand Winch #DL14125 is the 2" x 15' Strap #DL6148. The hook on this strap has a safety latch on it to help keep it secured to the load during operation. You will need a 2-3/4"…

view full answer...

Answer 4

For a replacement you could use the Dutton-Lainson Hand Winch #DL14125. This is a single speed winch with the same 600 lb capacity. It comes with their zinc TUFFPLATE finish and a 5-year warranty. Shelby is no longer business and typically there…

view full answer...

Answer 5

Hey Charles, when using the Mounting Brackets for Trailer Fender #CE26098G-2 to install the Fulton fender part #F008563 the position of the brackets really comes down to what will work best for your individual situation. I think going into the…

view full answer...

Answer 6

We have just what you need, the Roadmaster Adapter Kit for Blue Ox Motorhome Mounted Tow Bars, #RO64FR. This Made in the USA product will adapt your Blue Ox tow bars to be used with ROADMASTER direct-connect style baseplates, or to a crossbar.

view full answer...

Answer 7

We do not offer replacement inner tubes for jacks of that capacity. If you are unable to keep the drop leg from staying up you will need to replace the jack. We have a couple options. The Buyers Products Heavy-Duty 4" Square Jack w/ Side Pin…

view full answer...

Answer 8

I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

The Atwood RV Carbon Monoxide and Propane Gas Detector part #AT36681 will be an excellent replacement for the ProTECHtor LP Gas Detector. The Atwood RV Carbon Monoxide and Propane Gas Detector has a seven year life span which is pretty standard. The…

view full answer...

Answer 10

For your Atwood EHM6-SM, I recommend replacing it with the Dometic RV Water Heater #DMC74FR. This water heater is similar to what you already have, boasting the same 6 gallon capacity, is powered off of 120VAC, and has a 1,400W output. This water…

view full answer...

Mounting Holes Measurements and Strap Width for Dutton Lainson 600 and 900 Pound Winches

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching