Demco Commander Tow Bar Replacement Arm Components
Updated 05/09/2022 | Published 05/06/2022
Products Featured in This Question
Question:
One of the bolts holding the arm to the bracket connected to he car broke today and the bolt in the other arm bent when I got the car stopped. I need two arms, plus the hardware that attaches the brackets to the bar. I have the adapters that work with their Guardian shield, not the standard tabs. I believe these take different hardware? Also, are there instructions for replacing the inner arms?
asked by: Don B
Expert Reply:
For the Demco Commander the correct replacement clevis bolt is the part # DM1372-95. You may also need Nut # DM02595 and washers # DM03809 to go with it.
Then for the bent arm you will want the Replacement Inner Arm Connecting Shaft for Demco Commander Tow Bar - Qty 1 # DM15713. If the square portion was bent then you will want # DM13577-92 for the left side with the storage rod for your electrical cord or # DM13578-92 for the right side which doesn't have the storage.
Product Page this Question was Asked From
Replacement Inner Arm Connecting Shaft for Demco Commander Tow Bar - Qty 1
- Accessories and Parts
- Tow Bar
- Arms
- Inner Arm
- Driver Side
- Passenger Side
- Demco
more information >
Continue Researching
- Q&A: Why Would Inserting Inner Arm of Roadmaster Falcon Tow Bar be Difficult After Cleaning
- Q&A: Replacement Parts Needed for the Roadmaster Falcon All Terrain Tow Bar # RM-522
- Q&A: Difference Between the Roadmaster Sterling All Terrain RM-576 and Sterling RM-555 Tow Bar
- Q&A: Replacement Control Module for Coach Step 725-0042
- Q&A: Replacement RV Step Module for Coach Step with Module Number 752-0021
- Article: Can You Flat Tow a 2024 Chevy Colorado?
- Q&A: Replacement Drivers Side Inner Arm For A Roadmaster BlackHawk 2 All Terrain Tow Bar
- Q&A: Replacement Inner and Complete Arm Assemblies for Roadmaster BlackHawk 2 All-Terrain Tow Bars