Can I Lift The Rear Of My Trailer If My Axles Are Already Overslung
Updated 04/23/2022 | Published 04/22/2022 >
Question:
I would like to raise my 2014 open range 4". The springs are already on the top of the axles. It has three axles. Can you help? thanks
asked by: George S
Expert Reply:
Your only option is to go with taller suspension spring hangers since your axles are already overslung. (Your leaf springs are on top of your axles.) Due to this, you cannot just raise the rear of your trailer, in a safe manner. For example, you will be able to raise the height of your trailer with the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center, part # APTT1, if your hangers are shorter than 2-1/2". If you provide me with the measurements of your existing hangers I can find a hanger kit to fit your trailer.
Once you get your new hangers, you will have to cut the old hangers off your trailer. The new hangers will have to be welded on in their place. Please keep in mind, raising the trailer will also move the center of gravity of your trailer higher which can lead to trailer sway. You may have to add a weight distribution system to counteract this change.
I have included a product description link, a picture explaining how to measure trailer hangers, and a weblink about raising your trailer's height below.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Q&A: 7k Trailer Axle Needed With A 95" Hub Face And 80" Spring Center
- Q&A: Why Do Tandem Axle Trailers Need Equalizers Instead Of Independently Mounted Axles?
- Q&A: Axle Placement When Building A Three Axle Trailer
- Q&A: Replacement 3-1/4" Tall Spring Hanger Bracket
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Where to Position the Trailer Axle?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements



