Replacement Keel Rollers for 1959 OB-70A Boat Trailer

Updated 04/05/2022 | Published 04/04/2022

Products Featured in This Question

Yates Bow Roller for Boat Trailers - Heavy-Duty Rubber - 3" Long - 1/2" Shaft

(428)

$14.40

CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 8"

(694)

$50.59

Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 8-7/8" x 5/8"

(868)

$13.62

Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 8" Long - 5/8" Shaft

(313)

$32.78

Question:

I need the 4 keel rollers that run down the middle of a 1959 OB-70A Tee Nee trailer. They are each mounted by two bolts with eyelets and are centered at 9inch apart, so I assuming an 8inch roller would do. I need rollers and bolts. Do you carry anything that would replace the originals?

asked by: James S

Helpful Expert Reply:

Thanks for the pictures! I have a couple of options for you to replace the keel rollers on your 1959 OB-70A Tee Nee trailer. The Yates Keel Roller for Boat Trailers item # YR8244-105EC are 8" long and work with a 5/8" Shaft. If you are able to reuse your current bolts or replace them you will also need the Roller Shaft with Pal Nuts for Boat Trailer Rollers item # CE10725A.

If you are unable to reuse your current mounting hardware or find similar bolts we have the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 8" item # CE10403G. This is the 8-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability. The bracket has slotted mounting holes that allow you to adjust the position during installation

expert reply by: Jerred H