Installation and Capacity of Curt Class I Trailer Hitch item # C11204

Updated 09/21/2009 | Published 09/18/2009

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(60)

$433.26

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2336)

$31.79

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1815)

$86.66

etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome

(3660)

$34.34

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2948)

$3.42

Question:

2005 Honda Civic 4-dr sedar Any drilling required? What is max capacity of this vehicle

asked by: Dennis Q

Expert Reply:

The Curt Trailer Hitch # C11204 is a bolt-on installation that does not need any drilling or enlarging of holes (see instructions). The difficulty level of this hitch is rated 3 out of 10, meaning a novice installer should take about 30 minutes to install the hitch.

The Curt Class 1 Trailer Hitch, item # C11204, has a towing capacity of 2,000 pounds and a tongue weight rating of 200 pounds. You will need to check your vehicle ratings to be sure of the capacity it has. Your vehicle towing capacity should be printed on the inside of the driver side door jamb or in the owner manual. Each specific model can have a different tow rating depending on options.

Some items you may need to complete your tow package include the following.

Drawbar 2-1/8" Rise # C45501 (use in rise position only)
Pin and Clip # F-4
Hitch Ball # 19256 or # 19258
Hitch Lock # e98879
Vehicle Wiring # C59236