Correct Under-Bed Kit for Using 5th Wheel Hitch That Fits Puck System on 2013 Ford F-250 W/out Pucks  

The Adapter Rails for Curt 5th Wheel Hitch #C88KR that you mention for your B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 will only add about 2-1/2" of height. With the B&W Patriot #BWRVK3270 measuring in at 17-19" in…

The B&W Universal Base Rails and Installation Kit for 10 Bolt 5th Wheel Hitches, part #BWRVR3200 is just the hardware that installs into the bed of your truck, and you'll need to purchase a hitch separately.

The distance between the rails should be center to center 22" (pictured below). This rail spacing is considered industry standard. I've attached the installation video for the custom fit B&W rails #BWRVK2401 to help you with the…

I have a great option that will allow you to use a B&W Companion Hitch but there is no way to add an OEM puck system to your 2013 Ford F-250 FX4. Instead you will want the B&W Custom Underbed Installation Kit item #BWGNRK1111-5W. This is a…

Both of the hitches you asked about have some great features. They both have dual jaws for better king-pin contact, and both have the same towing and vertical load limit capacity. There are a few differences between the hitches. The hitch height of…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…