Replacement Momentary Slide Out Switch for 1998 Nash 5th Wheel

Question

Question:

I have a 1998 Nash 5th wheel with 1 slide. It uses a Elkhart LR-20985 momentary rocker switch. It is discontinued. Do you have a replacement. Mini rocker 1-1/8x7/8 switch dimension. If your switch is not same size Ill need a new mount plate as well. Please advise. Thank you,

asked by: Hal S

0

Expert Reply:

I am not sure what size would work best but we do have the Labeled Single Slide-Out Momentary Switch - On/Off/On - White # 37213445 which would work great as a replacement for what you have now. This needs cut out dimensions of 1.85" tall x 1.20" wide.

expert reply by: Jameson C

0

Answer 1

I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap #DC200L-DCRP or get it in a 2-pack as part #RG04-040.

view full answer...

Answer 2

Hey Mark, thanks for all of the info you listed about your hub. With just that info we know that the hub/drum part #AKHD-655-35-EZ-K that you referenced is an exact replacement.

view full answer...

Answer 3

To know exactly what key will fit your enclosed trailer's access door lock we'll need to know the brand and the key code. For example, since you were looking at a Bauer door lock, if your key code was 357 then you could use the Replacement…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Momentary Slide Out Switch for 1998 Nash 5th Wheel

Product Page this Question was Asked From

Continue Researching