Recommended Hitch and Trailer Wiring Harness for 2013 Kia Sorento SX
Updated 08/19/2013 | Published 08/15/2013 >
Products Featured in This Question
Question:
Im in the process of getting a hitch for my Sorento. Currently, the trailer that I plan to tow will be very light modified utility trailer for kayaks and camping gear. However, I also found a Sky Chair stand that fits into a hitch that I plan to get as well, so Id like to get as high of a TW as possible I was thinking Class III. I called the dealer and was told that it would cost ~$900, I decided to look online and found your site. When I spoke to the dealership, they stated that I needed the full harness which they said was almost 200. After reading some of the other posts, I decided to look behind the drivers side wheel and found a couple of connectors. I attached a couple of photos so that you can see it. It looks like its the right one, but the picture of the harness doesnt have a good angle to make absolute sure. With that said, what hitch and harness should I get? Thanks in advance for any guidance.
asked by: Leeland C
Expert Reply:
According to my research, the 6 cylinder models of the Sorento like your SX can tow up to 3500 lbs.
I would recommend the Curt Class III hitch, part # C13073. If your Sorento was equipped with the factory tow package, you would use the # C56332 you referenced. If your vehicle does not have the factory tow package, then the connectors you located under the vehicle are most likely not active, and you would need to use # 118506, which would plug inline with the factory wiring harness feeding the drivers and passenger side tail light assembly, with one wire being ran under the vehicle to the positive battery terminal.
I have linked you to an FAQ article showing how to run the power wire, as well as to some install videos that you might find helpful.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- Factory Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Determining if 2015 Hyundai Santa Fe Has Factory Tow Package
- Q&A: How to Determine if 2013 Hyundai Santa Fe has Factory Tow Package When Choosing Wiring Harness
- Q&A: How to Prevent Backfeeding On Charge Line Kit
- Q&A: Trailer Wiring And Hitch For A 2026 Hyundai Tucson
- Q&A: Will the Tekonsha Wiring Work on My 2025 Santa Cruz? Complete Tow Package for 2025 Santa Cruz
- Q&A: Fulton Plastic Fender # F00584 and Fender Light Recommendation for Right and Left Side of Trailer
- Q&A: Does BAK Revolver part # BAK85VR Fit Long Bed 2000 Chevy Silverado 2500 LS
- Article: My Trailer Hitch Doesn't Fit
- Article: Dealer Spotlight - Croft Trailer and Hitches
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch

