Are Components of Slipper Spring Equalizer Kits AP302 and AP202 the Same

Question

Question:

Hi.What is different between AP202 and AP302? Can I use AP302 Triple-Axle Trailer Equalizer Kit for two Tandem-Axle Trailers? Thanks.

asked by: Vitaliy B

0

Expert Reply:

The individual components between the two kits are the same but the quantities are different since the part # AP302 was designed for triple axle trailers and the # AP202 is designed for tandem axle trailers.

expert reply by: Jameson C

0

Answer 1

Joseph, I reached out to Dexter and they said that the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs #AP202 doesn't have a specific torque spec for shackle bolts. They need to be secure enough, but if they are too tight then the…

view full answer...

Answer 2

I went out to the warehouse and pulled part #AP202 and took some measurements of the equalizer for you. From the center of the bolt hole to the center of the bolt hole the equalizer measures exactly 10 inches. The overall length is 11-1/16".…

view full answer...

Answer 3

In order to find the correct spacing for your hangers item #AP316, equalizer kit item #H302, and your 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long item #e74SR you will need to mock up all the parts to determine the…

view full answer...

Answer 4

Yes and no. The first thing to note is that the etrailer brake kit you were looking at is part #AKEBRK-6 and is just a regular brake kit while the Dexter Axle kit you were looking at is part #23-464-465 which is their Nev-R-Adjust kit that adjusts…

view full answer...

Answer 5

It looks like you need the Equalizer for 2" Wide Slipper Springs part #TREQ1304 which should be an exact match for your existing equalizer. It is designed for 2" wide slipper springs and measures 11" long overall.

view full answer...

Answer 6

I can help you determine exactly what you need to replace the suspension in your triple axle trailer, although we don't have any type of database which has each part for each year, make and model of trailer that would tell us exactly what you…

view full answer...

Answer 7

I talked to my contact at EcoHitch and the determining factor with this is whether or not your M package includes the backup sensors or not. If you do not have the backup sensors on your 2015 BMW X5 the ECO-hitch #306-X7265 will work for you. If your…

view full answer...

Answer 8

The replacement for the Curt s0601u-r1 powered circuit protected taillight converter is Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236. This is an universal wiring harness that requires splicing into the vehicle…

view full answer...

Answer 9

From what I have found, you have Peterson 134-15 series clearance lights on your trailer. For an incandescent replacement you could use the Peterson Clearance and Side Marker Trailer Light - 2 Bulbs - Oblong - Red Lens #425400.

view full answer...

Answer 10

Hello again Adam! Since you have 7k Lippert axles the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is the correct kit. This is going to be a significant improvement over the stock suspension. For wet bolts you…

view full answer...

Answer 11

Hey Dave, since you have 7k axles I would recommend just going with the 7k tandem Roadmaster Comfort Ride part #RM-2460-2570 as it's the correct rating and has correct size components. But if you wanted to go with the 8k kit part #RM-2460-2580…

view full answer...

Are Components of Slipper Spring Equalizer Kits AP302 and AP202 the Same

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching