Class 5 Hitch with 20K Capacity for 2015 Ford F-550
Published 02/18/2022
Products Featured in This Question
Question:
do you have a class 5 hitch for a 2015 F-550 Tradesman that will handle 20,000 lbs?
asked by: Glen A
Expert Reply:
Sure do, as long as the distance between the outer edges of the frame members is 34 inches and the vertical distance between the bottom of the frame members and the underside of the bumper is less than 6 inches, the Curt # C15845 Class V hitch is what you'd need. The hitch has a 20K towing/2700 lb tongue weight capacity and features a 2-1/2 inch receiver tube.
If you need a greater drop than that, you'll need to use a weld-on service body hitch like # C87CR which also features a 2-1/2 inch receiver and a 20K capacity.
Product Page this Question was Asked From
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Continue Researching
- Article: Hand Winches
- Q&A: Which Locking Pin Will Fit The Adjustable Ball On The Curt Adjustable 2-Ball Mount # C99NR?
- Q&A: How to Install Furrion FCE48TASL Side Cameras On RV with Diagram
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Length of Bolts in Demco Hardware Kit 6166
- Q&A: Wheel Chock Recommendation for Harley in Trailer
- Q&A: Parts Needed To Install A Brake Controller In A 2012 Toyota Sienna LE
- Q&A: Hitch And Wiring For A 2024 Honda CR-V Sport Touring To Tow A Small Trailer Across The Country
- Q&A: Replacement Parts for the Square Direct Weld Jacks
- Article: Which Hitches are Made in the USA
- Article: Steel vs. Aluminum Ball Mounts
- Article: What Do I Need To Tow A Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Routing the Power Wire for a Trailer Wiring Harness