What is Overall Height of etrailer Jack # TJP-2002S-B
Published 02/16/2022 >
Question:
What is the total length of TJP-2002s-b from the very top of the jack to the bottom of the foot when completely retracted? What is the distance from the end of the round male mount BD- 500240 where it attaches to the frame to the edge of the jack? The trailer I am attaching this to has two 1 1/2” welded supports I need to clear once the jack is attached. Thank you so much! If this works out I’ll send you final pictures as it may help someone else.
asked by: Bill P
Helpful Expert Reply:
The overall height of the trailer jack # TJP-2002S-B is 21-3/4 inches when fully retracted. When the pipe mount # BD500240 is welded to the trailer the jack will basically be flush up against the trailer frame so there wouldn't be any clearance there. Now the body of the hitch would be more like 3-1/2 inches away from the frame of the trailer though so if that's the clearance you are looking for this would work to fit past your 1-1/2 inch supports.
Product Page this Question was Asked From
Round Pipe Mount Swivel Trailer Jack w/ Footplate - Sidewind - 14-7/8" Lift - 2,000 lbs - Weld
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Sidewind Jack
- 1001 - 2000 lbs
- Manual Jack
- 15 Inch Lift
- Weld-On
- With Rectangle Foot
- etrailer
more information >
Continue Researching
- Q&A: What are Mounting Hole Bracket Dimensions of etrailer jack part # e35YV
- Q&A: Upgrading Standard Drop Leg Foot To Snappad Style On etrailer Swivel A-Frame Jacks
- Q&A: Replacement 24-1/4" Long 2-Leaf Slipper Spring for a 1,000 lbs Axle
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Q&A: Is There A 1.5" Hitch To 2" Hitch Adapter?
- Q&A: Is There an Adapter to Mount the Ultimate Trailer Jack to a Side Mount Bracket on Trailer?
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Most Popular Wheel Bearings
- Article: Trailer Jacks
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

