Parts Needed to Flat Tow 2022 Ram 1500 Eco-Diesel
Updated 02/15/2022 | Published 02/14/2022 >
Products Featured in This Question
Question:
I have a 2022 1500 EcoDiesel and need flat tow parts, what do you recommend?
asked by: Jonas G
Helpful Expert Reply:
To properly and safely flat tow, your setup must have:
1) A base plate kit
2) A tow bar to connect the installed base plates to the RV
3) Safety cables in case the tow bar fails
4) Wiring to synchronize your RV’s and towed vehicles indicator lights
5) A supplemental braking system to synchronize your RV’s and towed vehicles brakes
You may or may not need additional components to complement/adapt your equipment for best fitment to your RV.
I recommend the Roadmaster Direct-Connect Base Plate Kit, # RM-522203-5 to flat tow your 2022 Ram 1500 with the Eco-Diesel engine.
For a compatible tow bar, I recommend the Roadmaster Sterling All Terrain, Non-Binding Tow Bar, # RM-576. This has a weight capacity of 8000 lbs. so it is well suited to safely flat tow your Ram. It is the non-binding design that allows for easy disconnect on uneven ground. The included safety cables will keep you from having to purchase them separately.
For a needed wiring solution, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267.
For a supplemental braking system, required by law, I recommend the Blue Ox Patriot # BLU37TR due to the easy installation and removal when you are are ready to flat tow, or are done flat towing. The Patriot # BLU37TR will apply the brakes to your truck with the same intensity that you apply the brakes in your Motorhome. You will need to install the 12 Volt Outlet Kit # RM-9332 to power the Patriot.
You will most likely need a high-low adapter to level the tow bar to your RV. I have included a helpful article on measuring for the correct adapter, and a link to all of our high-low adapters for you to take a look at.
We always recommend that you refer to your vehicle specific owners manual under the recreational towing section for any restrictions, or required steps to make your vehicle safely ready to be flat towed.
Please note the linked product review and installation videos below.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media







Continue Researching
- Q&A: What Base Plates Will Work for a 2024 Jeep Grand Cherokee with Tow Hooks and Air Shutters?
- Q&A: Will The Curt Trailer Hitch Receiver C82RJ Fit The 2027 Kia Telluride
- Q&A: Trailer Hitch and Wiring for 2027 Kia Telluride
- Q&A: How to Flat Tow 2019 Ram 1500 Limited 4x4 Behind Motorhome
- Q&A: Recommended Flat Towing Parts for a 2023 Jeep Wrangler Sport
- Q&A: How to Install a 6-Way Trailer Connector To Front of Flat Towed Vehicle
- Q&A: Why are Diodes Needed for Lighting when Flat Towing a Vehicle
- Article: Brake Controller Installation: Starting from Scratch
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Can You Flat Tow a Ford Ranger?
- Article: Must-Have Flat Towing Components
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Wiring Diagrams

