Will the EcoHitch Trailer Hitch Receiver Fit 2019 Mazda 3 Hatchback

Question

Question:

Does this hitch fit the hatchback version of the 2019 Mazda 3?

asked by: Ariel

0

Expert Reply:

The EcoHitch Hidden Trailer Hitch Receiver # EH23VR is confirmed to fit the 2019 Mazda 3 sedan. Unfortunately, it will not fit your Mazda 3 hatchback.

For a hitch that is a confirmed fit for your 2019 Mazda 3 hatchback, I recommend the Curt Trailer Hitch Receiver # C98BR. This is a custom-fit Class I hitch with a 1-1/4" receiver. It features a black powder coat finish and a limited lifetime warranty.

I have attached the written instructions for your reference.

expert reply by: Robin H

0

Answer 1

According to my research the Curt Trailer Hitch Receiver #C98BR will fit your 2022 Mazda 3 with the rear diffuser, but you'll likely need to trim it up a little to keep the hitch from pushing up on that diffuser. We haven't had any reports of…

view full answer...

Answer 2

Hi Tom, The Saris MHS Bike Rack for 1 Bike #SAR23MR weighs approximately 67lbs and has an 80lb bike capacity. The overall length from the hitch pin hole to the furthest point on the rack is approximately 27". If you need any other info just let…

view full answer...

Answer 3

You are correct. The Saris MHS Modular Bike Rack for 2 Bikes - 2" Hitches - Tilting, part #SAR73MR, will not work with your wife's Blix Aveny because the rear fender will interfere with the racks arms. Another reason it will not work is…

view full answer...

Answer 4

It won't; I'm guessing you want it since it is a 2 inch hitch but there are no 2 inch hitches that fit your 2023 Mazda 3 hatchback, just the 1-1/4 inch Curt Trailer Hitch Receiver #C98BR.

view full answer...

Answer 5

Yes, there is a trailer hitch receiver that fits your 2024 Mazda 3 Hatchback, from Curt, at the following part number: - Curt Trailer Hitch Receiver #C98BR I verified this fit directly with the manufacturer for you

view full answer...

Answer 6

Yes, to install the Draw-Tite Sportframe Trailer Hitch Receiver #24984 on your 2023 Mazda 3 you will need to remove that panel and it won't be put back into place. Hitch instructions only mention this when the hitch either prevents the panel…

view full answer...

Answer 7

Yes the Curt #C98BR is a fit for your 2019 Mazda 3 hatchback with the rear diffuser. I attached a picture of this hitch installed on a similar Mazda 3 that has the same the rear diffuser.

view full answer...

Answer 8

The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24984 fits the 2019-2022 Mazda 3 Hatchback. Unfortunately, this means that you cannot use it on your 2018 as well. For a similar hitch that will fit the 2018 I…

view full answer...

Answer 9

For your 2021 Mazda 3 there is actually only the one option, the Curt #C98BR which is a Class I trailer hitch with a 1-1/4" receiver; the tongue weight rating is for 200 lbs. Although this has a towing weight rating of 2,000 lbs, it should be…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Will the EcoHitch Trailer Hitch Receiver Fit 2019 Mazda 3 Hatchback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching