Availability of 15 by 6 Trailer Wheel with 5 on 4-1/2 inch Bolt Pattern with Spokes

Question

Question:

mirage trailer wheels. I wish to replace my wheels with 15” x 6” with a bolt pattern 05 on 4 1/2. Would like to find a set of four chrome spoke wheels. Can you help me

asked by: Don

0

Expert Reply:

The closest option we have is the part # AM22653 which is a 15 inch diameter wheel that is 6 inches wide, is a 5-spoke, and has a 5 on 4-1/2 inch bolt pattern. It is not chrome though as it is an aluminum wheel but it does look really good like you can see in the attached picture.

expert reply by: Jameson C

0

Wheel Mounted to Boat Trailer
(click to enlarge)

Answer 1

We currently offer 2 15-inch galvanized wheels that may be a good fit for your Sure Load boat trailer. I linked the page for you to check out. It seems to me you need a 5 on 4-1/2 inch bolt pattern. I recommend the Americana Steel #AM20524 which is a…

view full answer...

Answer 2

The Steel Spoke Trailer Wheel #AM20524 you referenced is not rated for a maximum psi. That rating will be in response to the valve stem and tire you use. The tire you mentioned is a passenger tire noted by the P before the number and is not…

view full answer...

Answer 3

In order to pick out a spare tire cover you will need to know the overall diameter of the tire you have currently. The easiest way to get that info is to use a tape measure to measure across the diameter. Once you know what diameter you have you can…

view full answer...

Answer 4

Hey Wendell, thanks for the information! Since you have a Lippert 122093 hub for a 5,200 lbs axle you'll need the Bearing Kit item #BK3-300. This kit includes inner and outer bearings, races, a grease seal, and a replacement cotter pin. This kit…

view full answer...

Answer 5

Hey Brian, sure thing! I went out to our warehouse and took a picture of the Goodyear Endurance ST205/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel - 5 on 4-1/2 - LR D #GY37QB for you. Let me know what you think. Are you needing a spare? Or are…

view full answer...

Answer 6

If you don't already have a 4-way wiring harness, we need to start there to get your 7-way. For a 4-way, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56020 which plugs in behind the tail lights of…

view full answer...

Answer 7

Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…

view full answer...

Answer 8

Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…

view full answer...

Answer 9

Hello John, thanks for reaching out. Sadly, we do not offer that size Goodyear tire on a 5-lug wheel. We can offer you a ST225/75R15 tire on a 5-lug aluminum wheel, but it would not be a Goodyear. Our selection of Goodyears is pretty limited at the…

view full answer...

Answer 10

Yes, you can use a ST205/75R15 tire like the Karrier ST205/75R15 Radial Trailer Tire part #AM10244 on a 15" diameter x 6" wide wheel like the Aluminum Sendel Series T02 Machined Trailer Wheel part #AM22653. We also offer this exact same…

view full answer...

Availability of 15 by 6 Trailer Wheel with 5 on 4-1/2 inch Bolt Pattern with Spokes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching