Replacement Cam Tightening Wrench for Laclede 3229 Chains

Question

Question:

Hello. I bought these chains from a friend but he lost the cam tool. I see many different tightening tools available at your site and wanted to know if you could suggest a lower cost, or better, option than the $20 angle tool Leclede seems to use. Thanks!

asked by: Mike

0

Expert Reply:

I reached out to Titan Chain about using one of their cam tightening wrenches on your Laclede 3229 chains and they said you can use either the Replacement L-Shaped Cam Tightening Wrench # TCLH3 or the T-Shaped Cam Tightening Wrench # TCTH3. Personally I like the # TCTH3 because you can get better leverage and use both hands due to the T-design.

Titan Chain also mentioned that when using their cam wrenches with a different brand of chains you may have to grind the wrench down some to fit.

expert reply by: Scott S

0

Answer 1

Titan has a few different cam tensioner tools based on the size of the Titan chains. The part #TCLH3 is for standard chains that are at least 7 mm thick, #TCLH2 is for standard chains that are up to 5.5 mm thick, #TCTH3 is for heavy duty chains that…

view full answer...

Answer 2

I contacted the manufacturer about the length of the Replacement Cam Tightener for Titan Chain Heavy Truck Snow Tire Chains #TCCAM3HD while opened and closed. They said the #TCCAM3HD is sold with two links, one on each end. So the overall measurement…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 6

Hey Dan, for your 2024 Ford F-350 that has the OEM pucks the correct Pullrite sliding hitch you need is the part #PUL73RR. The #PUL63RR fits the standard above bed fifth wheel rails that are 22 inches apart on center. What fifth wheel do you have?

view full answer...

Replacement Cam Tightening Wrench for Laclede 3229 Chains

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching