Is the 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles Equivalent to the 1203T3 Spring
Updated 11/09/2021 | Published 11/08/2021
Question:
Are these equivalent to an EMCO 1203T3?
asked by: JD
0
Expert Reply:
The 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles # e74SR is equivalent to the 1203T3 and is listed as its replacement. This 5 leaf spring measures 26-5/8" long and has a capacity of 3,500 lbs. As noted down below on the product page, to ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
expert reply by:
Robin H
0
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Suspension Upgrades for 2017 Grey Wolf 22RR
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement for a Dexter 072-032-00 Slipper Spring
- Q&A: Does Roadmaster Make the Long U-Bolt Kit part # RM33KT
- Q&A: Replacement 5-Leaf 27 Long Slipper Leaf Springs For 7,000lb Trailer Axle
- Q&A: What Roadmaster Comfort Ride System Fits a Grand Design Solitude 384 with Tandem 7K Axles?
- Q&A: Can I Switch From 5-Leaf Slipper Springs to 7-Leaf Springs?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review