Can The Surco Universal Exterior RV Ladder Be Shortened

Question

Question:

We have a Coachman Clipper 16RDB. Because the design, we would need to mount the ladder on the port side of the camper but the ladder is two long. Can the ladder be shortened at the midsection or is that an area reenforced for added strength? Can the caps on the steps be removed and the steps repositioned? Thank you.

asked by: Jay

0

Expert Reply:

We do not recommend to modify the Surco Universal Exterior RV Ladder # SP502L to fit your camper as it may compromise the structural integrity of the ladder. However, if you choose too, you should be aware that the steps are welded to the frame of the ladder and are not able to be repositioned.

expert reply by: Bryce D

0

Answer 1

Hello Bernie, thanks for getting in touch. The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 includes the carrier itself, the supports, bumper brackets and all necessary hardware. You can see all of the included parts in the pictures below.…

view full answer...

Answer 2

Hey Robert, I think the etrailer E-Track part #e62VR would work really well for what you are wanting to do. It has more than enough capacity and would give a decent amount of flexibility with where you want to mount the arrays as well. Just run bolts…

view full answer...

Answer 3

The Stromberg Carlson #LA-401BA has a hinge that can be installed where the two ladder pieces join, which can help with any odd shapes on the rear of your coach. These are typically used on travel trailers but they can also be used on Class A or…

view full answer...

Answer 4

We don't currently carry the OEM RV ladder for your 2018 Thor Hurricane Class A Motorhome but we do carry the Stromberg Carlson RV Exterior Ladder w/ Hinges #LA-401BA or the Surco Universal Exterior RV Ladder #SP502L. The #LA-401BA is…

view full answer...

Answer 5

Thank you for the photo, and I can tell you that the Solera RV Slide-Out Awning - 11'1" Wide #LCV000184673 does require at least 7 inches of clearance in order to install. Unfortunately, there is just no way to shorten the awning, so the…

view full answer...

Answer 6

The 5 on 4-1/2 bolt pattern of a hub or wheel such as #AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will…

view full answer...

Answer 7

We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder…

view full answer...

Answer 8

The answer to your question will depend on your bumper. More than likely the #MO22FR will be the correct part for your Grand Design Transcend Xplor 321BH. If you have a tube frame with a bumper that is 4" - 4-1/2" wide then this will work…

view full answer...

Can The Surco Universal Exterior RV Ladder Be Shortened

Product Page this Question was Asked From

Continue Researching