What is the Center to Center Distance Between the Slotted Holes on Roller Bunk Bracket DL21742

Question

Question:

Hello, Could you tell me which is the distance between slots? center to center

asked by: Daniel

0

Expert Reply:

I went out to the warehouse and pulled a roller bunk bracket # DL21742 to measure the slotted hole spacing for you. The slotted holes are 1-1/4 inches apart on center. I also made a short video showing this measurement for you.

expert reply by: Michael H

0

Answer 1

The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to install…

view full answer...

Answer 2

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

view full answer...

Answer 3

You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…

view full answer...

Answer 4

The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.

view full answer...

Answer 5

Yes, you would want to use two sets of 4 foot roller bunks since your current bunks are 8 feet long. I would recommend you go with the Dutton-Lainson Boat Roller Bunks #DL21740. These roller bunks would have plenty of capacity and would be sized…

view full answer...

Answer 6

The Dutton-Lainson 4-Foot Roller Bunks, part #DL21740, can be mounted directly to the 2 x 4 bunk boards on your trailer using hardware of your choosing. My contact at Dutton-Lainson advised that the choice of nuts and bolts versus screws is not…

view full answer...

Answer 7

We do have a variety of roller bunks that can be used as a direct replacement for carpeted bunks. I recommend either going with the 2,500 lb capacity which comes in Black #DL21754 or Silver #DL21740, OR the 3,000 lb capacity which also comes in Black…

view full answer...

Answer 8

Hey Steve, it looks like you are comparing the Malone EcoLight Sport Trailer with J-Carriers part #MAL93FR with the Yakima LowRider Kayak Trailer #Y82QD. The Malone actually has a 400 lb weight capacity vs. the Yakima which is rated for 750. The…

view full answer...

Answer 9

Yes, the galvanized Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections part #DL21741 is what you are looking for. The rollers are constructed of 12-gauge, galvanized steel and have zinc-plated steel rollers hardware included. This…

view full answer...

Answer 10

The only roller bunks we carry, see link, come in 4 and 5 foot lengths. They can be cut to the lengths needed though. So for example if you needed a 9 foot section you could get 2 of the 5 foot models and cut off 12 inches of one to get 9 feet. For a…

view full answer...

Answer 11

The part you asked about is discontinued, does not fit, and Atwood is no longer in business so they don't have replacement parts. You'll need to purchase a replacement coupler: - Demco Channel Tongue Trailer Coupler #DM16080-95 - Titan…

view full answer...

What is the Center to Center Distance Between the Slotted Holes on Roller Bunk Bracket DL21742

Product Page this Question was Asked From

Continue Researching