Is The Voyager Multi Camera Controller Compatible With Sony Backup Cameras

Published 09/15/2021

Question:

I have a new monitor but no instructions. My cameras are Sony 8.1 volts and the monitor is 12 volts. I wired my previous monitor and it worked good. I wired the new monitor the same way but all I can see it no signal. I want all three cameras to be powered and use the monitor to what I want to see. If I wire the cameras with 8.1 volt power to the trigger wires will this work? It certainly would have been nice to have a wiring diagram with the system when I purchased it but when i contacted to seller I did not receive a reply. CSW3

asked by: Rich W

Expert Reply:

I spoke with the manufacturer of the Voyager Multi Camera Controller for Observation Monitor - 3 Camera CSW3 and unfortunately this product is not going to work with your Sony cameras. You would need to purchase Sony branded equipment to match with your cameras or go with a completely different system.

If you want to replace the system then I recommend the Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen # FCE48TASL-05. This wireless backup camera system has 3 waterproof cameras with night vision, 1 third brake light camera and 2 side marker light cameras. The touch screen, anti-glare monitor displays up to 4 cameras if you wanted to add an additional camera to the front of your trailer or above the entry door. These cameras can be wired to the running lights for observation instead of the reverse lights for just backing up.

expert reply by: Kevin C