Replacement Wheel Stud for Trailer Hub # AKHD-865-8-K
Published 09/14/2021
Products Featured in This Question
Question:
What is the correct wheel stud part number for this hub? I saw it is 9/15 x 1 5/16. Thanks.
asked by: Bill M
0
Expert Reply:
For the etrailer hub # AKHD-865-8-K you'd need the replacement studs part # 7-257.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Replacement Brake Assemblies for a 7K Trailer with 12 x 3 inch Brake Assemblies
- Q&A: Replacement Control Board for Fan-Tastic Vent 7350 Series
- Q&A: Solution for Needing Replacement Circuit Board for Older Fan-Tastic Roof Vent
- Q&A: Recommended Gooseneck Hitch for a 2024 GMC Sierra 2500 w/ a 6-3/4 Bed
- Q&A: Gooseneck Coupler That is Needed Longer Than 22 inches
- Q&A: Does the Lippert Hub and Drum Assembly LC57DX Take a Threaded Grease Cap?
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)