1 Bike Add-On To Convert Kuat Transfer V2 To A 3-Bike Carrier

Question

Question:

I ordered the transfer v2 add on to get 3 bikes on the rack but it seems it wont connect to the Transfer 2 that I have. It must be the wrong add on for a 3rd bike. Was there a different one to order?

asked by: Ryan P

0

Expert Reply:

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes # KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks # KU57FR.

expert reply by: Andrew N

0

Answer 1

To replace the hitch pin of your Kuat Transfer V2 Bike Rack #KU84FR you can use the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL2. This hitch pin comes with a lock so that you can also prevent anyone from taking off with your bike rack.

view full answer...

Answer 2

I can help you out, as there is indeed a hitch lock that is compatible with the Kuat Transfer V2 for 2 inch hitches such as the 2-bike #KU84FR and 3-bike #KU24FR; I reached out to Kuat who told me that the lock needed for the V2 is the following: -…

view full answer...

Answer 3

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you can use…

view full answer...

Answer 4

The correct hitch lock for your Kuat Transfer V2 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #KU64FR is the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL1. This will allow you to lock the Transfer V2 to your vehicles…

view full answer...

Answer 5

If you are using the Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR for a 2-inch hitch, I confirmed with Kuat that you will need the #HL1 because of the 1-1/4 adapter sleeve that comes with the rack.

view full answer...

Answer 6

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Answer 7

Due to the spare tire on your 2022 Jeep Wrangler Rubicon, you will need a hitch extender for the distance between the face of your trailer hitch and the edge of the spare tire. If it is a stock spare, you are looking at about 8" of distance.…

view full answer...

Answer 8

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case you were…

view full answer...

Answer 9

Yes. The #KU57FR is compatible with the T201B Kuat Transfer V2 1 Bike Platform Rack #KU64FR.

view full answer...

Answer 10

One of my favorite cost effective bike rack that has everything you're looking for is the Kuat Transfer V2 #KU64FR with the one bike add on #KU57FR. It's only about 45 lbs, well made and will not rust over time. Whatever metal components…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

1 Bike Add-On To Convert Kuat Transfer V2 To A 3-Bike Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching