Can I use Trailer Bunk Boards for a Boat Lift?
Updated 09/01/2021 | Published 08/31/2021
Products Featured in This Question
Question:
I want to use the bunks for my pontoon on my boat lift. Wiil they work? The lift beams are 4inch wide and 6inch deep.
asked by: Lee H
Expert Reply:
The CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers # CE26244G you referenced in your question is designed for boat trailers but can be used on your boat lift. These bolster brackets are designed specifically to support pontoon boat trailer bunks. Each bracket can hold up to two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons. On both the right and left sides of the trailer, one bracket is mounted in the front and another in the rear. You may need extra brackets if you intend to mount these on a lift.
I recommend the CE Smith Carpeted Bunk Boards for Boat Trailers each are 6' Long and they are sold as a pair item # CE27840.
Product Page this Question was Asked From
CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- 6 Inch Tall
- 3 Inch Wide
- Galvanized Steel
- 15-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: How To Know Which Master Cylinder Will Be The Correct Replacement For A Surge Actuator
- Q&A: How To Install Rollers On a Pontoon Boat
- Q&A: How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?
- Q&A: Would 7-Way Trailer Wiring Circuit Have Amperage Rating for Powering 13 amp Horn
- Q&A: Solution for Transporting Native Titan 10.5 Kayak
- Q&A: Are All 3,500 lb Axle Hub/Drums Interchangeable
- Q&A: How To Replace 18 Foot Long Bunk Boards On a Pontoon Boat Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: What To Look For When Buying Ratchet Straps