What Rear-Loading Kayak Will Work for My Tandem Hobie Kayak that Weighs 99 Pounds?

Question

Question:

I have factory installed roof rack on my 2018 Chevy Traverse, so my assumption is I will need to purchase crossbars. I prefer the Nautic 581.

asked by: Jennifer M

0

Expert Reply:

I went ahead and called my contact at Rhino-Rack, and they confirmed that the Nautic 581 carrier # RR581 has a maximum weight rating that is the same as the roof rack system that you mount it on. Most of the time, roof racks are rated above 99 pounds.

However, if you want to be sure about the weight capacity, I recommend the Yakima BigCatch Kayak Carrier w/ Tie-Downs # Y04091. The BigCatch has an impressive maximum weight capacity of 150 pounds, which is plenty of capacity to accomodate your 99-pound Tandem Hobie kayak. In addition, the BigCatch includes the rear-loading mounting process you are looking for.

For either the Nautic 581 or the BigCatch, you will need a crossbar system. For recommendation about what crossbars you need, I would be happy to assist you if you provide the year/make/model of your vehicle.

expert reply by: Bob C

0

Jennifer M.

1/1/0001

I have factory installed roof rack on my 2018 Chevy Traverse, so my assumption is I will need to purchase crossbars. I prefer the Nautic 581.

Reply

Bob C.

8/20/2021

Yes, you will need crossbars in order to mount the Rhino-Rack Nautic 581 # RR581 on your 2018 Chevy Traverse. For a complete crossbars system, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" # RRVA118B-2 (black) or # RRVA118S-2 (silver) - RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points # RRRCL4 - Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RR32SV With this roof rack system, you will be able to attach the Nautic 581 and other accessories on the roof of your 2018 Chevy Traverse.

Reply

Answer 1

For your Honda Pilot with Thule Aeroblade crossbars there's really only one kayak rack we carry that's going to have the capacity you need. The etrailer J-Style Kayak Carrier #e98878 that you referenced has a 100 lb capacity and fit Thule…

view full answer...

Answer 2

The weight capacity of the Thule Hull-A-Port Rooftop Kayak Carrier, part #TH834, is 75 lbs. You will also want to check your owners manual or with the Ford dealer on the roof weight capacity of your vehicle to make sure you do not overload the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 9

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

view full answer...

Answer 10

Hey Loyd, nearly all roof rack setups for top channels will fit the Yakima channels you have on your cap. Rhino Rack has complete kits for this that include their HD crossbars with the part #Y01-140B-NT which comes with 65 inch long crossbars.

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

What Rear-Loading Kayak Will Work for My Tandem Hobie Kayak that Weighs 99 Pounds?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching