Which Wedge to Use with B and W Hitch and Lippert Turning Point Pin Box

Question

Question:

What wedge do I need for a Lippert turning point pin box and a BWRVK3710

asked by: Mike

0

Expert Reply:

The correct wedge to use with the B and W hitch # BWRVK3710 that you referenced and your Lippert Turning Point is the part # SWW-06.

expert reply by: Jameson C

0

Answer 1

If you are having trouble fitting the wedge that came with your Lippert Turning Point pin box to your 18K B&W Patriot #BWRVK3255 then you can use the Custom Wedge #SWW-06 instead. This is actually designed for use with the Reese Sidewinder pin…

view full answer...

Answer 2

We have options for you, though the Air Lift WirelessONE Compressor System for Air Helper Springs - Remote and Mobile App - EZ Mount #AL25980EZ is not something that can be used for tire inflation, it is only something you can use for air springs.…

view full answer...

Answer 3

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 4

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 5

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 6

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

I checked out your 2016 Solitude 321RL and since it has a tapered nose and an extended pin box you wouldn't need a slider hitch installed in the bed of your 2020 GMC Sierra 3500. You could use the B and W Companion Fixed Hitch for GM rail kit…

view full answer...

Answer 10

Hi Kevin! Though Reese has been around for a long time and people swear by them, between Reese and B&W 5th wheel hitches, I will always recommend B&W. The B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw -…

view full answer...

Answer 11

Hello James, you came to the right place. Since your RV is designed with short bed turning clearance in mind, you should not need a slider hitch. The best hitch for the OEM puck system in your GMC is the B&W Companion OEM 5th Wheel Hitch…

view full answer...

Answer 12

Since the pin box of your Forest River Rockwood Signature 8298KS is one that was designed for short bed turning clearance you could use a fixed hitch in the bed of your 2021 Silverado 2500, 6.5 short bed that has OEM puck system like the B and W…

view full answer...

Which Wedge to Use with B and W Hitch and Lippert Turning Point Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching