Replacement Brake Assemblies, Drums and Brake Lines For a 1993 EZ Loader Adjustable Boat Trailer

Updated 08/03/2021 | Published 07/29/2021

Products Featured in This Question

Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs

(406)

$141.64

Kodiak Hydraulic Brake Line Kit - Single Axle - 15'

(44)

$114.11

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

(119)

$163.51

Question:

I need to replace my backing plates 1993 ezloader surge brake drums vin is 1ZE1REU11NAXXXXXX. what part do I need. and brake lines.

asked by: Gary G

Helpful Expert Reply:

I recommend the Hydraulic Brake Kit # AKFBBRK-35-D for upgrading your original backing plates. This assembly has dacromet coating on the backing plates, stainless steel springs and an aluminum hydraulic cylinder to resist rust and corrosion. And they are free backing to prevent the brakes from locking up when you drive in reverse.

These will pair well with the Trailer Hub and Drum Assembly # AKHD-545-35-G-K that are galvanized. The bolts are also zinc coated to prevent corrosion and all new bearings and a grease seal are included.

The Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT is an upgraded brake line kit. The fittings use brass and stainless steel to prevent corrosion and the rubber lines are more easily installed as you will not have to bend the steel lines that rust away.

expert reply by: Bud M