Can SumoSprings be Used with Weight Distribution for 2020 Ford F-250 Super Duty  

For your 2020 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-127-54 and the 1,500 lb kit part #SSR-127-47. Basically you want to go with the lightest duty kit…

I suggest the SumoSprings Solo Custom Helper Springs, #SSR-127-47 if you will be using this to tow but also as a daily driver. This is the better option to provide maintenance-free helper springs and still provide the factory comfortable drive when…

Suspension enhancements don't increase the capacity of the suspension and are typically chosen based on the load that the truck will be handling. Too high of a capacity tends to give you a rough ride quality when unloaded because the enhancement…

Really the only difference is that the SumoSprings #SSR-127-47 have a 1,500 lb weight capacity while the SumoSprings #SSR-127-54 have a weight capacity of 2,800 lbs. So one just offers more support for your 2020 Ford F-350 and would offer better…

The SumoSprings Rebel Custom Helper Springs are only rated to -25 degrees Fahrenheit so if you'll be using the truck in temperatures below this then you may have to consider other options like the Timbren Rear Suspension Enhancement System. The…

For your 2008 Ford F-250, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver, part #65049. I've included a video of our installation team putting this hitch onto a 2008 Ford F-250 so you can get familiar with the installation process.…

Although it mounts to the sides of the front frame members instead of the tow hooks, the EcoHitch #EH59FR front mounted receiver would install so that the receiver tube sits behind the license plate holder. The Curt #C31018 and Draw-Tite #65049 would…

For your 2008 Ford F-350 we have the Draw Tite hitch part #65049 which is a confirmed fit and has a tongue weight capacity of 500 lbs. The motorcycle carrier we offer that would work best is the Ultra Fab part #UF48-979033. Reason being it weighs…

Hey Matt, so we don't have any install info on installing the EcoHitch front hitch part #EH59FR with the Ranch grille guard you have but if you've seen it done before it would have to be the way you described so I do believe you are on the…

I can understand not wanting to remove the brush guard on your 2016 Ford F-250 Super Duty, but unfortunately there are no front mounted hitches that can fit with the guard, because like you said, they do mount in the same location. There are also not…

Because the SumoSprings #SSF-111-54 will always be engaged on your 2017 Ford F-350 the stock suspension will not compress as much as it normally would. This will give you the feeling that there is lift though it isn't actually lifting anything it…

The installion instructions for the Draw-Tite Front Mount Trailer Hitch Receiver part #65049 do not require that the front lower bumper spoiler be removed therefore yes, I believe you can leave it in position while you install the trailer hitch. The…