How Much Height To The Bunk Boards Does the Boat Trailer Deluxe Roller Bunks Add
Updated 07/12/2021 | Published 07/09/2021
Question:
Im planning on installing the Dutton rollers 2, 4 foot rollers onto my 8-foot wood bunk. However, it looks like itll raise the boat close to 3 inches. Boat would then sit higher than the wheel wells and would seem like it could cause a problem securing the bow of the boat as the eye hook would be above the bow roller. Any suggestions?
asked by: Seth S
Expert Reply:
The Boat Trailer Deluxe Roller Bunks like part # DL21740 will add about 2-1/2" from the height of the bunk board. This should really not pose many issues but you may be able to adjust the bolster brackets or swap them out for a lower profile option.
I have attached a list below with some of our replacement bolster bracket options.
Product Page this Question was Asked From
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Roller Bunk Recommendation for a Boat Trailer With 8 Feet Bunks
- Q&A: Do You Have a Complete Wobble Roller Bunk Assembly?
- Q&A: Does Dutton-Lainson Boat Trailer Roller Bunk Come In Galvanized Version
- Q&A: Recommended Roller Bunks Replacement for Wooden Bunks for G3 1860 Boat
- Q&A: What Types of Installation Hardware Should be Used to Install Dutton-Lainson 4-Foot Roller Bunks
- Q&A: Recommended Roller Bunks For 4,500lb Boat On Boat Lift
- Q&A: Recommendation for Roller Bunks on a Boat Trailer with 8 Foot Carpet Bunks
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Lighting Requirements
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)