Recommended Ball Mount for 2019 Mazda CX-9 with 1-1/4" Hitch  

For hitch balls we recommend white grease like the part #58117 since the ball moves around in the coupler but for the hitch itself there isn't a grease recommended for that.

To install hitch ball #C40001 you will need a wrench wide enough to fit around the wrench flats on the ball, a torque wrench good for up to 160 foot pounds and a socket for the nut. You could also use a bench vise if you do not have a wrench large…

Yes, the Tekonsha T-One 4-Pole Wiring Harness #118718 will work fine to power LED lights on a trailer or accessory carrier used with your 2019 Mazda CX-3 but it does require the 12V power wire connection in order to function. The plug-in connectors…

To apply grease to the top of a hitch ball with the part #58117 all you would need to do is apply a small amount to the top of the ball. The coupler will then push the grease around and spread it evenly on the ball.

The Curt hitch part #C11418 fits a 2016 Mazda CX-3 but we do not have any hitches for a 2015 model as 2016 was the first production year for this vehicle in the US.

Yes the Curt hitch part #C11418 that you referenced is a fit for a 2019 Mazda CX-3 hatchback like have as it fits all models. We had the chance to install it on a 2019 hatch as well which you can see in the attached install video.

Although both the Draw-Tite #24933 and the Curt #C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with…

The only hitch we offer for your 2007 Altima is a Class I hitch, which has a 2000 lb towing/ 200 lb tongue weight (the maximum amount of weight that can be suspended from the hitch) capacity. Using an adapter would lower the tongue weight capacity by…

You can definitely get replacement hardware for the Curt Trailer Hitch Receiver #C11418 that fits your 2018 Mazda CX-3; what you will need is the Replacement Hardware Kit for Trailer Hitches #RHK. All you need to do is click #RHK, enter…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…