Replacement Grease Dust Cap For Hub Bore Of 3.155
Updated 06/26/2021 | Published 06/24/2021
Products Featured in This Question
Question:
I lost a cap or never had one I pulled another cap appears to be 3 and 3/16” od cap
asked by: W C
0
Expert Reply:
The Fulton Grease Cap # F001531 has a outer diameter that is 3.155" where it goes into the hub.
You will want to measure your hub bore to ensure that it is the correct size for your particular hub. A Digital Caliper # PTW80157 is the best way to verify the exact measurement of the hub.
expert reply by:
Bud M
0
Hub Bore Measurement
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Tool to Drive in 2.72" Hub Dust Caps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How To Remove and Install Grease Caps and Bearing Protectors on Trailer Hubs
- Q&A: What Seal Comes With The DX87UR Bearing Kit
- Q&A: How to Measure for Offset on Trailer Wheel
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Replacement Bearing Kit With Bearing Buddy Bearing Protectors To Replace Triton 07994-P Kit
- Q&A: How to Find Which Trailer Brake Assembly Goes on the Left or Right Side of a Trailer
- Article: Trailer Lighting Requirements
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure a Trailer Axle