Mounting Locations For Draw-Tite Trailer Hitch Receiver # 24922 On a 2018 Volkswagen Beetle

Question

Question:

Will this Part number 24922 work with this Dune Beetle ? Please see the attached photos The pic with the hanger is the driver side and the other pic is the passenger side. I know the slotted hole is for the front mount but the rear mount is where Im not sure. Please confirm. Thank you.

asked by: Bill

0

Expert Reply:

I have attached a image of the diagram included in the installation instructions. In the image you can see the frame rails and the supports. The receiver is designed to reuse the bolts that hold those supports to attach the receiver at the forward most part. The spacers, carriage bolts and remaining hardware are for the rear slots in the frame to anchor the rear holes of the receiver.

I have also linked the installation instructions below for you to reference.

expert reply by: Bud M

0

Installation Instructions Diagram Draw-Tite 24922
(click to enlarge)

Customer Image 1
(click to enlarge)

Customer Image 2
(click to enlarge)

Answer 1

Unless your 2019 Beetle is an R-Line model or a Diesel with the AdBlue DEF tank, we do indeed offer a hitch fit. If your Beetle doesn't fall into either of the abovementioned parameters, the #C11354 Curt Class I hitch you'd looked at would…

view full answer...

Answer 2

The differences between the Curt hitches #C11260 and #C11354 are pretty subtle, but it is enough that you will want to go with the #C11260. This hitch is designed to fit a 2012 to 2014 Volkswagen Beetle Coupe - Gas (excluding the Turbocharged models)…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hi Chad! While we do have an option for a 2013 VW Beetle, the Curt 11260 was discontinued mid 2024 and is no longer available. With that said, the Curt #C11354 will fit the hatchback and convertible, but not the diesel models or R-Line models. Did…

view full answer...

Answer 8

Yes, I recommend the Thule Hitching Post Pro Rack #TH934XTR for your 2017 Volkswagen Beetle Convertible. This will require a Curt Trailer Hitch Receiver #C11354 for the bike rack to fit into since there is not a truck mounted bike rack confirmed to…

view full answer...

Mounting Locations For Draw-Tite Trailer Hitch Receiver # 24922 On a 2018 Volkswagen Beetle

Featured Help Information

Miscellaneous Media

Continue Researching