How To Determine Which Bearing Kit Fits A Specific Trailer
Updated 06/25/2021 | Published 06/23/2021
Products Featured in This Question
Question:
Can you tell me what replacement wheel bearing kit to buy for my trailer? Vin # is . Thank You
asked by: Jay B
Expert Reply:
I would be happy to help you find the correct bearing kit for your trailer, but unfortunately we do not have a way to look this up by the VIN. Instead there are a few different options to get the information.
If you can send me a picture of the axle tag located on the center of the axle I can use that to determine the bearing combination.
If the axle tag is missing/unreadable then you will need to remove one hub and look for the bearing number stamped in the face of each bearing as shown in the picture of the # L44649.
With either the axle tag picture or bearing combination I would be happy to confirm the correct bearing kit for you.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Bearing Kits For Lippert 3,500LB Trailer Axles
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,600 lbs
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Q&A: Comparing Strap and Wire Cable for Use with Dutton-Lainson Hand Winch
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Bleed Your Trailer Surge Brakes