Portable Power Watchdog Surge Protector Compatibility with Adapters

Question

Question:

My RV is 50 amp. This I would need a 50 amp protector. What happens if no 50 amp is available at campground? By using an adapter I can plug the surge protector in but will it work correctly and still protect my Rv.

asked by: Mike S

0

Expert Reply:

The Portable Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down, # HU87FR has a 50 Amp rating. This is compatible with dog bone cables. If you use this with an adapter connecting to 30 amp service you will still have the rated protection.

expert reply by: Michael R

0

Answer 1

The Camco RV Power Defender Voltage Analyzer #CAM55310 will offer 1,050 joules of surge protection. It has a dual function of not only a surge protector but also a tool to determine if the power supply is correctly wired to protect your RV…

view full answer...

Answer 2

Watchdog surge protectors like the Portable Power Watchdog Surge Protector with Bluetooth - 50 Amp Item #HU47FR will need to match your camper amperage to properly function. The adapter from 50 amp to 30 amp will go between the surge protector and…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Portable Power Watchdog Surge Protector Compatibility with Adapters

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching