Pairing A Furrion Vision S Wireless RV BAck Camera System With Side Marker Cameras

Updated 06/22/2021 | Published 06/18/2021

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen

(736)

$800.70

7-Way Vehicle Power Adapter for Furrion RV Observation Camera

(661)

$65.95

12V PWM Filter for RV Backup Camera Systems - Hardwire

(246)

$68.70

Question:

Just purchased a 5inch Vision S with shark fin and 2 side cameras. Installed right side camera. Running lights work and blue power light on bottom of camera is ON. Doesnt seem to want to pair. Monitor shows that it IS paired to sharkfin still in the box. Factory paired? Need guidance. Thanks,

asked by: Roy E

Expert Reply:

Yes, Furrion does sometimes have the side marker cameras already paired in the factory and they don't always have it paired to the correct spot either (i.e. side marker paired as rear camera).

Since you already have power since the blue light is on you'll need to hold the pairing button on the back of the rear camera until you hear it click and it will show it's paired. The pairing button for the side marker cameras is located on the bottom.

If you aren't getting a good enough signal to pair the cameras to your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen Item # FCE48TASL-05 you can use the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera Item # FR87PR. This adapter boosts the power through your 7-way connection to increase the signal strength of your cameras.

For a more permanent solution you can also splice in the PWM Filter # VGR64VR behind your camera to provide a steady current to the camera.

expert reply by: Kevin C