Distance From Center of Lug to Channel On Lock N Roll Articulating Channel Tongue Trailer Coupler
Updated 06/04/2021 | Published 06/03/2021
Question:
what is the length of the trailer side from the hitch pins to the tongue mount for the 508 weld on for 3inch tongue thanks
asked by: Ken
0
Expert Reply:
The distance from the center of the lug to the base of the channel plate on the Lock N Roll Articulating Channel Tongue Trailer Coupler part # 336TS508 is 4-3/4".
expert reply by:
Conner L
0
Lock N Roll Dimension
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 11000 lbs GTW
- 3 Inch Channel
- Latch Plate
- 2-Bolt
- Standard Grade
- Lock N Roll
more information >
Continue Researching
- Q&A: Are The Goodyear Duratrac LT225/75R16 Trailer Tires Or Truck Tires?
- Q&A: Is There Lock N Roll Articulating Hitch that Fits 2 inch Hitch
- Q&A: Is There a Trailer Coupler Designed For Offroading
- Q&A: Articulating Hitch Recommendation for 2023 Intech Flyer Pursue Camper
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: How to Use a 3,500Lb Timbren Axle-Less Trailer Suspension System with 6 on 5-1/2 Inch Bolt Pattern
- Q&A: Attaching the Lock N Roll Articulating Coupler to Tongue of Trailer where Bolt Holes Don't Line Up
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class