What Are the Wet Bolt Dimensions for MORryde X-Factor UO21-003

Updated 05/26/2021 | Published 05/23/2021

Products Featured in This Question

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(2163)

$125.09

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(771)

$11.37

Question:

Hello, I am using a MORryde UO21-003 X Factor suspension support kit and I have one of the wet bolts that wont take grease for some reason. Do you guys sell new bolts that work with that system? I know they are slightly longer than normal so Im not sure what to order. Thanks for any help

asked by: Brad V

Expert Reply:

Before replacing the wet bolt I would make sure that the hole on the zerk fitting is pointed sideways, as that might be why it's not taking any grease. If you do need to replace the bolt you'll need a 9/16" bolt that's roughly 3.4" long. The closest bolt we have available is the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3-5/16" Long # 126B2, which is a 9/16" diameter bolt and is 3-5/16" long

expert reply by: Erik B