Mounting Brackets for Sealed, Thin Line LED Trailer Clearance, Side Marker Light MCL65AB
Updated 03/25/2013 | Published 03/24/2013
Products Featured in This Question
Question:
I purchased and just received four clearance light bulbs #MCL65AB. I now learn that I also need the plastic mounting bracket including wiring for these bulbs. The plastic mounting brackets that Ill be replacing are beige or tan in color and are rivited in place on the trailer. Please help me locating the correct part.
asked by: Michael B
Expert Reply:
There are a few options for brackets for trailer light # MCL65AB. None are beige or tan but we do have black, # A65PB. Chrome, # A67CB. You will need to remove the old brackets and use steel hardware to install these new brackets. The light will ground through the mounting hardware so they have to be screwed into steel.
Product Page this Question was Asked From
Optronics Thinline LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 4L x 1W Inch
- Amber
- Optronics
more information >
Continue Researching
- Q&A: Replacement Spindle Washer For 3,500 Lb EZ Lube Spindle
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Replacement Clearance Lights for 2007 Featherlite Trailer 8127
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Q&A: Solar Powered Roof Vent for Cargo Trailer
- Q&A: Need Grease Caps With Outer Diameter of 3.350 Inches
- Q&A: Can I Get Key 0370 For The Master Lock Coupler Lock ML377KA
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)