How To Install The RV Safe Carbon Monoxide And Propane Gas Detector
Updated 10/11/2025 | Published 05/06/2021 >
Question:
Is it complicated to change out Atwood carbon and propane detector in a RV?
asked by: Judy
Helpful Expert Reply:
Changing your carbon and propane detector is a very simple process. If installing the RV Safe Carbon Monoxide and Propane Gas Detector Item # RS34FR you want to make sure your power is turned off and remove the old unit from the wall. Before disconnecting the wiring observe how it is wired. You simply have 12 volt power going to the unit and a ground.
There will be one red wire and one black wire. The black is ground and the red is power.
Product Page this Question was Asked From
RV Propane Gas and Carbon Monoxide Detector - 12 Volt - 2 Wire - White
- RV Gas Detectors
- Carbon Monoxide and Propane
- Alarm
- White
- RV Safe
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Carbon Monoxide Detector for Atwood 36681
- Q&A: Replacement For Atwood 36636 Carbon Monoxide & Propane Detector
- Q&A: Replacement Propane Gas Detector for an Atwood 31013 Propane Detector
- Q&A: Replacement Atwood Gas Detector 36719
- Q&A: Solution for Replacing Atwood Propane Gas Detector 36719
- Q&A: Recommended Replacement for Atwood RV Propane Gas Detector 31013
- Q&A: Replacement for Atwood 35230A Propane Gas Detector
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Determining Trailer Tongue Weight
- Article: Trailer Maintenance Schedule
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: Keep Your Daydream
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: 5th Wheel vs Gooseneck Hitches: Which Fits Your Truck




Ravelle
10/11/2025
Hi there, Are the fuses inline? I wired my Safety gas leak detector up exactly like the old one was but it's not getting power. I checked all the flat fuses for the entire trailer and they are all good and everything else seems to be getting power.