bing tracking image
Q & A Icon

Can Draw-Tite Activator IV Trailer Brake Controller 5504 Be Installed In 2020 Ford Ranger W/ Tow PKG  

Updated 05/06/2021 | Published 05/05/2021

Question:

I just purchased an2020 Ford Ranger with the factory tow package. I have located the 4 wires under the left side of the dash. Will this controller work for my application?

0

Expert Reply:

Yes. The Tekonsha BRAKE-EVN # TK63VR you were looking at will work just fine on your 2020 Ford Ranger with the factory tow package.

You will need the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers # 20160 to connect to the factory wires you located underneath the dash of your truck.

In addition you will need a circuit tester like # PTW2993 to confirm the functions of the factory wires and match the functions to the # 20160 which are as follows:

Black wire is 12v power wire
White wire is ground wire
Blue wire is brake output wire
Red wire is cold side of stop light switch wire

I included a video review of the # TK63VR for you to take a look at.

expert reply by:
0
Samuel C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>