Will the Leer Latitude Tonneau Cover Fit a 2021 GMC Sierra with a Multi-Pro Tailgate?

Question

Question:

Will this fit 2021 Sierra 2500hd with multi-pro tailgate?

asked by: Dave K

0

Expert Reply:

I have a great solution to fitting a tonneau cover with your multi-pro tailgate on your 2021 GMC Sierra 2500. I reached out to my contact at Leer, and they confirmed that the Leer Latitude Soft Tonneau Cover - Folding - Vinyl and Aluminum # LE68FR will not fit with a multi-pro tailgate.

However, I did confirm that the Bestop EZ-Fold Folding Tonneau Cover # BE92YV will work with your multi-pro tailgate and not affect its functionality. The good thing about the EZ-Fold is that is it super low-profile and installs in only about 15 minutes without any drilling required.

expert reply by: Bob C

0

TruXedo Edge Soft, Roll-Up Tonneau Cover # TX873301
(click to enlarge)

Answer 1

For your 2022 GMC Sierra 2500, we have the LEER Latitude Soft Tonneau Cover #LE68FR. This is a tri-fold tonneau cover that is confirmed to fit your 6-3/4' bed, and folds up from the tailgate, to expose 3/4 of your trucks bed for access. This…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 6

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 7

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

Answer 8

Hey Dave, congrats on the new truck and trailer. You're definitely going to want the extra clearance an offset gooseneck ball provides with a 6-3/4' bed. The Gen-Y gooseneck pin boxes do not help with turning clearance. For your 2026 Chevy…

view full answer...

Answer 9

Hey Bert! The best way to figure this out is to mock it up on your Jayco Jay Feather 27MK. We don't have a way of knowing which rail would be best for any given trailer. Take a look at the attached pictures. You can use those measurements to see…

view full answer...

Answer 10

Hey KC, sorry for the confusion! The correct Pacbrake Alpha HD air bag kit for your 2024 GMC Sierra 2500 AT4 would be the part #PB56SV. This comes with the 2 inch spacer you would need for the AT4 so it's for sure the correct kit and will work…

view full answer...

Answer 11

Hey JB, The Firestone Ride-Rite Air Bags #F64XV are the correct airbags for your 2024 GMC Sierra AT4 trim. These are a no drill installation and bolt right up to your vehicle. With the on board compressor you can air up at any time. This kit is also…

view full answer...

Answer 12

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Will the Leer Latitude Tonneau Cover Fit a 2021 GMC Sierra with a Multi-Pro Tailgate?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching