Troubleshooting Trailer Wiring, Could Fuses of Vehicle be At Fault
Updated 04/20/2021 | Published 04/16/2021
Question:
my lights are working on my vehicle but I have no power to my trailer can a blown fuse cause this? my ground is good from vehicle but nothing to 3 other pins. If the fuse is blow will my brake and lights work in my vehicle??
asked by: Jack
Expert Reply:
If the trailer wiring of your vehicle uses factory wiring then a fuse could be responsible for the circuits not functioning. If the wiring is a kit that taps into the taillight circuits of the vehicle either using a tee connector or wire taps then it would most likely be the connection to the vehicle wiring or corrosion on the pins of the connector.
I attached a help article on trailer wiring for you to check out as well.
Product Page this Question was Asked From
Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- 7 Blade
- Plug Only
- Pollak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Why Does the etrailer Trailer Hitch part # e72AR Have a Higher Towing Capacity than the Vehicle?
- Q&A: Replacement Hub/Rotor for UFP 41030
- Q&A: Can you get the Trimax Coupler Lock Keyed Alike? What Coupler Lock can be Keyed Alike?
- Q&A: Metal 6-Way and 7-Way Replacement for Older Ford Truck
- Q&A: Recommended 7-Way Trailer Connector for a 2014 Ford F-150 w/out the Factory Towing Package
- Q&A: Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Can Weight Distribution System Be Used on Aluminum Trailer Frame
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Must-Have Flat Towing Components
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Maintenance Schedule