Recommended Brake Controller and Installation for 2021 Honda Passport

Question

Question:

Hi, I see you recommend the bluetooth wireless brake controller # 51180. I would prefer to use a hard wired brake controller. Please let me know which one you recommend for a 2020 Honda Passport Elite AWD. Also, what additional wiring is required for the hardwired controller when using the 118291 harness? Thank you

asked by: Ron

0

Expert Reply:

I see that you'd looked at the Curt item # C51170 Spectrum Brake Controller. While I really like the idea of a remote-type brake controller that features a control unit that mounts out of sight under the dash with a knob that mounts within the driver's reach, I prefer the Redarc Tow-Pro Liberty, part item # RED24FR. The control knob of the Liberty is smaller, and if it's installed in an un-used switch knockout in the dash or by using a mounting bezel like item # 331-TPSI-001, you'll end up with a less expensive controller that would provide a much better, almost factory installed appearance. Really the only advantage the Spectrum has is that it can handle a trailer with up to 4 axles, which you likely wouldn't tow with a Honda Passport anyway.

To install the Liberty, you'll need the Redarc universal wiring pigtail, part item # RED69FR. You'll also need the
item # 3070-S which would wire color for color with the item # RED69FR pigtail and would plug into the factory brake controller connector located to the left of the steering column near the top of the e-brake pedal.

expert reply by: Mike L

0

Answer 1

Yes. You could use the Curt Discovery #C84VV on your 2021 Honda Pilot with the plug and play adapter #C51392 to allow for an easier installation that won't require cutting into any wiring. However, the Discovery is a time delayed brake…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install the Curt Assure brake controller part #C49UR in your 2021 Honda Ridgeline the correct install harness is the part #C51392. The other harness was designed for other vehicles and not yours.

view full answer...

Answer 4

For your 2022 Honda Passport's 7-way wiring, you need the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118286 The T-One includes a ModuLite power converter to ensure that your vehicle's wiring matches that…

view full answer...

Answer 5

Installing the Draw-Tite #76290 hitch on your 2022 Honda Passport will require absolutely no drilling or trimming to get it to fit. This hitch is rated 3 out of 10 on our install difficulty scale and really shouldn't take much more than 30…

view full answer...

Answer 6

I recommend using the Curt Mounting Bracket for 7-Way Connector Plug item #C67UR to mount your 7-Way Connector to your Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" item #76290. The Curt mount item #C67UR will attach…

view full answer...

Answer 7

There is no fascia cutting/trimming required for the installation of the Draw-Tite #76290 on your 2022 Honda Passport. If you need help with the installation, I went ahead and attached a video of the hitch being installed on a 2021 model. It will be…

view full answer...

Answer 8

You can absolutely use an equalizer bar, also known as weight distribution hitch, on your 2021 Honda Passport. You will want to check the owner's manual or verify with Honda, but I am showing that your Passport has a towing capacity of 5,000lbs.…

view full answer...