Trailer Brake Controller For A 2019 Honda Pilot

Updated 08/17/2022 | Published 08/15/2022

Products Featured in This Question

Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional

(3063)

$190.00

Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers

(165)

$27.00

Question:

Hi. I have a 2019 Honda pilot that I would like to tow a 23 travel trailer. Which is the most affordable, effective and complete brake system for me? Thank you

asked by: Paul D

Expert Reply:

Depending on if you have a factory tow package or not on your 2019 Honda Pilot is the deciding factor on what parts you will need.

If you do have the Factory tow package then all you would need is the controller and the wiring harness for the controller. The Redarc Tow-Pro Liberty Brake Controller # RED24FR allows you to mount the control knob of this proportional controller on your dash or console. The main unit is installed in an out-of-the-way spot.

The controller has a 3 axis accelerometer that ensures the unit works no matter its positioning.

The Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED59FR will plug into the back of the Tow-Pro brake controller and the other end of the plug will plug beneath your vehicle's dash.

If you do not have the factory tow package you will need to install The T-One Vehicle Wiring Harness for Factory Tow Package # 118760. Which will make it to where your trailer's stop, turn, and taillights will mirror your vehicle's stop, turn, and taillights. Your vehicle should already have a factory connector at the rear so you would also need The T-One Vehicle Wiring Harness for Factory Tow Package # 118286. This kit contains fuses and relays needed to activate the tow package on your vehicle.

I attached a review video link below.