Can Ram Gooseneck to 5th Wheel Trailer Coupler Adapter part # KPG5-R25 Install in Any Orientation
Updated 03/30/2021 | Published 03/28/2021
Question:
I have an older gooseneck trailer, a 1992 Titan, and the gooseneck tube has no holes in it for a load-bearing pin it just has 2 set screws, on the side of the outer tube not on the front. Can this adapter be rotated so the pin holes are oriented roughly fore-and-aft, so the holes wont interfere with the set screws?
asked by: Ian
0
Expert Reply:
The Ram Gooseneck to 5th Wheel Trailer Coupler Adapter part # KPG5-R25 can install in basically any orientation you'd like. If you preferred the set screws on the side of the tube or in front that would easily work well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 25,000 lbs
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- Gooseneck Trailer to 5th Wheel Hitch
- No Extra Clearance
- 25000 lbs
- Replaces Inner and Outer Tubes
- Not Shock Absorbing
- etrailer
more information >
Continue Researching
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Gooseneck Coupler Inner Tube with a King Pin to Tow 5th Wheel Trailer with 5th Wheel Hitch
- Q&A: Does Lippert Hybrid Threaded Brake Hub Come with Bearings and Grease Loaded?
- Q&A: Can a 2025 Ram 2500 with Ram Boxes Tow Fifth Wheel Trailer
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Swapping King Pin Setup on Kaufman Car Hauler Back to Gooseneck Setup
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Replacement Hub for DICO 45264
- Q&A: Measurements of Buyers Products Utility Storage Box 3371712250
- Article: Trailer Wiring Diagrams
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)