Curt Left Hand Sway Control For Travel Trailer

Updated 03/18/2021 | Published 03/15/2021

Products Featured in This Question

Curt Friction Sway Control for Weight Distribution Systems

(336)

$87.85

Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(179)

$49.73

Question:

I am looking for a Curt left hand sway control assembly for my travel trailer. Can you take a right hand sway control and reverse the bar that attaches to the ball on the WD hitch?

asked by: Steven S

Expert Reply:

For the Curt Friction Sway Control for Weight Distribution Systems # 17200 you will remove the inner arm and spin it 180 degrees, then reinsert into the friction sleeve. This will allow the sway control to be used on the drivers side of your travel trailer. The kit will include a weld on tab for your standard draw bar.

It would end up looking similar to Curt Ball Mount w/ Sway Control Tab # D320 with the way the sway tab is welded onto the side of the receiver draw bar. Yours would be on the other side unless you flipped the receiver or are running a dual sway control.

expert reply by: Bud M