Replacement Vent Cover for 2018 Starcraft Launch Hybrid Camper

Updated 03/16/2021 | Published 03/12/2021

Question:

I need a vent cover for my 2018 Starcraft Launch Hybrid Camper. Do you know which ones on your site would fit or do I need measurements?

asked by: Kyle S

Expert Reply:

I have a solution for you, but there isn't a way for us to know which vent cover will work on a particular camper in most cases. Most standard roof vents will measure 14" x 14" inside/ 14-1/2" x 14-1/2" outside, so it's fairly likely that you've got one of these.

The easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. For example, if there is a rolled metal hinge attached to the vent cover like on the # BV0554-01 vent cover then you've got a continuous hinge. You could use the above mentioned vent cover to replace yours assuming your vent is a standard 14-1/2" x 14-1/2" vent.

I've gone ahead and linked a photo of the typical vent hinge styles, as well as our entire selection of 14-1/2" x 14-1/2" vent covers for you to check out. If you've got something different and can provide photos and dimensions we can see if there is an alternative solution for this.

expert reply by: Erik B