Parts Needed to Convert Boat Trailer with 3,500 lb Axles to Electric Over Hydraulic

Updated 03/02/2021 | Published 02/26/2021

Products Featured in This Question

Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs

(72)

$490.79

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2907)

$15.39

Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi

(87)

$1005.50

Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers

(27)

$322.54

Question:

Hi, Can you please review and confirm that the following is compatible and everything I need to convert my 1993 Mastercraft boat trailer from surge to hyd/electric? HS381-9067 T2HRCM10DAC 2x BK2-100 I understand I will still need a flex line kit. Thanks,

asked by: Shawn C

Expert Reply:

As long as your boat trailer has 3,500 lb axles the parts you mentioned would work great as the Hydrastar actuators like part # HS381-9067 are the most reliable and best performing, the Titan Premier part # T2HRCM10DAC is a solid setup that will do great fighting corrosion since it's Dacromet. And since the hubs don't have bearings included you'd need the bearing kit part # BK2-100 that you mentioned as well.

Then for a brake line kit the part # T4830000 would be all that you'd need.

expert reply by: Jameson C