How to Install Wiring Harness On a 2006 PT Cruiser

Question:

i have a 2006 PT Cruiser that i am installing the wiring harness from your company. #C55532. The instructions state to plug in the T connecter with the brown, green and red except for the fact that the red and brown wire are on 1 T connecter and the green wire is on a separate and only 1 place to plug either one in. Which one gets plugged into the light assembly?

asked by: paul t

Expert Reply:

When you remove the taillight on the passenger side there will be two wire connectors connected to the back of the assembly. The connector connected to the turn signal circuit will connect inline with the wiring connector that has the green wire in it and to the turn signal connector on the taillight. The connector with the red and brown wire will be connected to the connector that operates the brake lights and running lights and will then be connected to that connector on the taillight. The connectors with the yellow wire go to the drivers side and connect inline with the turn signal circuit on that side of the vehicle.

expert reply by: Robert G