Hitch for Small Truck

Updated 02/08/2021 | Published 02/04/2021

Products Featured in This Question

Curt Class III Ball Mount with 1-7/8" Ball - 4" Drop - 3,500 lbs

(3913)

$36.44

Curt Solid Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 10" Long - 12K

(62)

$70.42

Curt Ball Mount for 2" Hitches - 2" Rise, 4" Drop - 8-1/4" Long - 7,500 lbs

(3913)

$28.59

Question:

Hello , We are looking for a 2 aluminum ball mount that has a 4: and has a longer than normal shank . This is for a small truck that has a hidden receiver hitch . The straight part of the shank must be 8: or longer from the center of the pin hole , to the back side of the . Is this something you have or could make ? (Additional Information: For 2" receiver opening with 4" drop. 8" from receiver pin hole center to back of drop.)

asked by: Sandom @

Expert Reply:

I have several hitches that closely match what you are looking for. Hitches I have that fit a 2"X2" receiver opening, and with 4" drop are as follows.
Curt # C45055, 8-1/4" hitch pin center to ball mount center. Overall length is 12-1/2"
Curt # C93KR, 8-1/4" hitch pin center to ball mount center.
Draw-Tite # 40331, 9-3/4" from hitch pin center to ball mount center
Curt # C45313, 10" from hitch pin center to ball mount center
Draw-Tite # 4285, 12" hitch pin center to ball mount center.

If you email me back with a selection I can recommend hitch balls with the correct ball diameter, shaft diameter, and shaft length.